SLIDING TABLE SAW
PROMASTER 10
The perfect starting point
The PROMASTER 10 Sliding Table Saw is built for the budget conscious user that still wants precision and accuracy. The PROMASTER 10 has a precision sliding table which runs on ball bearings and hardened steel guide strips.
Images
Technical Data
Technical Data
| Saw outer and inner diameter (min – max) | Ø250×30 – Ø300×30 |
|---|---|
| Max. depth of cut (90º) | 80 mm |
| Max. depth of cut (45º) | 65 mm |
| Loudness | 80 db. |
| Saw cycle | 4750 – 5250 rpm |
| Saw engine power | 4 Kw 3000 rpm |
| Table size | 550 X 950 mm |
| Table additional side sheet measure | 700 x 910 mm |
| Table rear additional dimension | 400 x 800 mm |
| Table top trench size | 1200 mm |
| gantry size | 3100 mm |
| mobile sled moving | 3200 mm |
| Traveling slide guard angle right-left | 0 – 45 right and left |
| Aluminum table width | 365 mm – 430 mm – 435 mm |
| Machine top trench size | 1950 mm |
| Machine top visor angle right-left | Ø – 45 right and left |
| Machine top visor gauge stop | 0 – 3000 mm |
| Scraper saw outer and inner diameter | Ø 125 x 20 mm |
| Scraper saw outer and inner diameter (Jumping) | Ø 200 x Ø 30 mm |
| Scratcher saw cycle | 6800 rpm |
| Scraper saw engine power (Jumping) | 0.75 kW 3000 rpm |
| plotter saw engine power | 0.75 kW 3000 rpm |
| Height of dust extractor pipe from ground | 845 |
| height of machine | 1400 |
| Weight | 790 lbs. |